HardieFlex Sheet in Eaves Lining Sizes

A fibre cement flat sheet specifically designed for eaves

A smooth, flat sheet that is produced in widths specifically made for eaves. It is site-painted to create a flat panel look.

Used in both new home and renovation construction

It’s specifically designed to line eaves and soffits in residential single and medium-density homes, including alterations and additions, where a flat panel look is required. It can be used on either timber or light gauge steel framed homes.

Fast and easy to install and ideal for additional fire protection

  • The speed at which the pre-cut sheets can be joined and installed makes them a cost-effective solution to the often difficult task of fixing eaves.
  • The combination of the James Hardie™ PVC Straight Jointer and the wide variety of sheet sizes pre-cut specifically for eaves makes it easy and fast to install by tradespeople, owner-builders and renovators.
  • Made from James Hardie fibre cement, HardieFlex sheet is non-combustible, making it ideal for use in homes built within bushfire-prone areas because it provides additional protection against the ingress of burning embers.* HardieFlex sheet is resistant to damage from termites, rot and fire.**


HardieFlex™ eave sheet Installation diagram

* Refer to the relevant council and code for suitability as well as the James Hardie Construction of buildings in Bushfire Prone Areas Technical Supplement.
** When installed and maintained correctly and to the extent set out in James Hardie’s published literature current at the time of installation.